These are the known mechanical and performance specifications for your 2010 Triumph Daytona 675.
Basic Specs
Engine
Displacement675.00 ccm (41.19 cubic inches)
Type
DetailsIn-line three, four-stroke
Max RPM
Compression12.7:1
Bore/Stroke74.0 x 52.3 mm (2.9 x 2.1 inches)
Valves/Cylinder4
FuelingInjection. Multipoint sequential electronic fuel injection with forced air induction
Ignition
Exhaust
Lubrication
CoolingLiquid
Performance
Horespower126.05 HP (92.0 kW)
Torque75.00 Nm (7.6 kgf-m or 55.3 ft.lbs)
Top Speed
Fuel Economy & Polution
Fuel Consumption
Fuel Capacity17.40 litres (4.60 gallons)
Emissions
Chassis
Frame TypeAluminium beam twin spar. Swingarm: braced, twin-sided, aluminium alloy with adjustable pivot position.
Rake23.9°
Trail
Front SuspensionKayaba 41mm upside down forks with adjustable preload, rebound and high/low speed compression damping
Front Travel130 mm (5.1 inches)
Rear SuspensionKayaba monoshock with piggy back reservoir adjustable for preload, rebound and high/low speed comporession damping
Rear Travel130 mm (5.1 inches)
Seat
Seat Height825 mm (32.5 inches) If adjustable, lowest setting.
Alt. Seat Height
Total Height1,120 mm (44.1 inches)
Total Length2,010 mm (79.1 inches)
Total Width700 mm (27.6 inches)
Ground Clearance
Wheelbase1,395 mm (54.9 inches)
Dry Weight162.0 kg (357.1 pounds)
Wet Weight184.0 kg (405.7 pounds)
Wheels & Brakes
Front Tire/Tyre120/70-ZR17
Rear Tire/Tyre180/55-ZR17
Front BrakesDouble disc. Nissin 4-piston radial mono-block calipers
Front Brake Diameter308 mm (12.1 inches)
Rear BrakesSingle disc. Nissin single piston caliper
Rear Brake Diameter220 mm (8.7 inches)
Wheels
Comments