These are the known mechanical and performance specifications for your 2011 Harley-Davidson FLHTK Electra Glide Ultra Limited.
Basic Specs
Year2011
MakeHarley-Davidson
ModelHarley-Davidson FLHTK Electra Glide Ultra Limited
TypeTouring
CostUS$ 23699. Euro 27495. UK £ 21200. Prices depend on country, taxes, accessories, etc.
Engine
Displacement1690.00 ccm (103.12 cubic inches)
TypeAir-cooled, Twin Cam 103. Pushrod-operated, overhead valves with hydraulic, self-adjusting lifters; two valves per cylinder.
DetailsV2, four-stroke
Max RPM
Compression9.6:1
Bore/Stroke98.4 x 111.1 mm (3.9 x 4.4 inches)
Valves/Cylinder2
FuelingInjection. Electronic Sequential Port Fuel Injection
Ignition
Exhaust2-1-2 chrome exhaust with dual mufflers and taper end caps
LubricationPressurized, dry-sump with oil cooler
CoolingAir
Drivetrain
Gearbox6-speed
Final DriveBelt
Clutch9-plate, wet
DrivelinePrimary Drive: Chain, 34/46 ratio. Final Drive: 32/68 ratio
Performance
Horespower
Torque138.00 Nm (14.1 kgf-m or 101.8 ft.lbs)
Top Speed
Fuel Economy & Polution
Fuel Consumption
Fuel Capacity22.70 litres (6.00 gallons)
Emissions
Chassis
Frame TypeMild steel; tubular frame; two-piece stamped and welded backbone; cast and forged junctions; twin downtubes; bolt-on rear frame with forged fender supports; MIG welded.
Rake26.0°
Trail170 mm (6.7 inches)
Front Suspension41.3mm telescopic, triple circuit damping
Front Travel117 mm (4.6 inches)
Rear SuspensionAir-adjustable
Rear Travel76 mm (3.0 inches)
Seat
Seat Height739 mm (29.1 inches) If adjustable, lowest setting.
Alt. Seat Height
Total Height
Total Length2,525 mm (99.4 inches)
Total Width
Ground Clearance130 mm (5.1 inches)
Wheelbase1,635 mm (64.4 inches)
Dry Weight389.2 kg (858.0 pounds)
Wet Weight
Wheels & Brakes
Front Tire/Tyre130/80-B17
Rear Tire/Tyre180/65-B16
Front BrakesDouble disc. 4-piston fixed caliper. Optional ABS.
Front Brake Diameter300 mm (11.8 inches)
Rear BrakesSingle disc. 4-piston fixed caliper. Optional ABS.
Rear Brake Diameter300 mm (11.8 inches)
WheelsContrast Chrome, 28-spoke Cast Aluminum
Comments