These are the known mechanical and performance specifications for your 2016 Triumph Daytona 675.
Basic Specs
Year2016
MakeTriumph
ModelTriumph Daytona 675
TypeSport
CostUS$ 12000. Prices depend on country, taxes, accessories, etc.
Engine
Displacement675.00 ccm (41.19 cubic inches)
Type
DetailsIn-line three, four-stroke
Max RPM
Compression12.7:1
Bore/Stroke76.0 x 49.6 mm (3.0 x 2.0 inches)
Valves/Cylinder4
FuelingInjection. Multipoint sequential electronic fuel injection with forced air induction and SAI
IgnitionDigital-inductive type via engine management system
ExhaustStainless steel 3 into 1 system with valve in secondary and under seat silencer
Lubrication
CoolingLiquid
Drivetrain
Gearbox6-speed
Final DriveChain
ClutchSlip-Assist Clutch
DrivelineO ring chain
Performance
Horespower128.00 HP (93.4 kW)
Torque74.00 Nm (7.5 kgf-m or 54.6 ft.lbs)
Top Speed
Fuel Economy & Polution
Fuel Consumption
Fuel Capacity17.40 litres (4.60 gallons)
Emissions
Chassis
Frame TypeAluminium beam twin spar. Braced, twin-sided, aluminium alloy with adjustable pivot position swing arm.
Rake22.9°
Trail88 mm (3.5 inches)
Front SuspensionKayaba 41mm upside down forks with adjustable preload, rebound and high/low speed compression damping.
Front Travel110 mm (4.3 inches)
Rear SuspensionKayaba monoshock with piggy back reservoir adjustable for preload, rebound and high/low speed compression damping.
Rear Travel129 mm (5.1 inches)
Seat
Seat Height820 mm (32.3 inches) If adjustable, lowest setting.
Alt. Seat Height
Total Height1,105 mm (43.5 inches)
Total Length2,020 mm (79.5 inches)
Total Width695 mm (27.4 inches)
Ground Clearance
Wheelbase1,375 mm (54.1 inches)
Dry Weight167.0 kg (368.2 pounds)
Wet Weight187.0 kg (412.3 pounds)
Wheels & Brakes
Front Tire/Tyre120/70-ZR17
Rear Tire/Tyre180/55-ZR17
Front BrakesDouble disc. Nissin 4-piston radial mono-block calipers. Switchable ABS.
Front Brake Diameter308 mm (12.1 inches)
Rear BrakesSingle disc. Nissin single piston caliper. Switchable ABS.
Rear Brake Diameter220 mm (8.7 inches)
WheelsCast aluminium alloy 5-spoke
Comments